7.0inch 800×480 TFT LCD Display for video door phone
1. Brightness can be customized, brightness can be up to 1000nits.
2. Interface can be customized, Interfaces TTL RGB, MIPI, LVDS, eDP is available.
3. Display’s view angle can be customized, full angle and partial view angle is available.
4. Our LCD display can be with custom resistive touch and capacitive touch panel.
5. Our LCD display can support with controller board with HDMI, VGA interface.
6. Square and round LCD display can be customized or any other special shaped display is available to custom.
Item |
Standard Values |
|||
Size |
7inch |
7inch |
7inch |
7inch |
Module No.: |
DS070INX50N-032 |
DS070INX50N-033 |
DS070INX50N-039 |
DS070INX50T-036 |
Resolution |
800RGB *480 |
800RGBX480 |
800RGBX480 |
800RGBX480 |
Outline Dimension |
164.9(W)X100.0(H)X5.7(D) mm |
164.9(W)X100.0(H)X5.7(D) mm |
164.9(W)X100.0(H)X3.5(D) mm |
164.9(W)X100.0(H)X3.5(D) mm |
Display area |
154.08(W)X85.92(H) mm |
154.08(W)X85.92(H) mm |
154.08(W)X85.92(H) mm |
154.08(W)X85.92(H) mm |
Display mode |
Normally white |
Normally white |
Normally white |
Normally white |
Pixel Configuration |
RGB Vertical stripes |
RGB Vertical stripes |
RGB Vertical stripes |
RGB Vertical stripes |
LCM Luminance |
250cd/m2 |
250cd/m2 |
250cd/m2 |
250cd/m2 |
Contrast Ratio |
500:01:00 |
500:01:00 |
500:01:00 |
500:01:00 |
Optimum View Direction |
6 O’clock |
6 O’clock |
6 O’clock |
6 O’clock |
Interface |
RGB |
RGB |
RGB |
RGB |
LED Numbers |
27LEDs |
27LEDs |
18LEDs |
18LEDs |
Operating Temperature |
’-20 ~ +70℃ |
’-20 ~ +70℃ |
’-20 ~ +70℃ |
’-20 ~ +70℃ |
Storage Temperature |
’-30 ~ +80℃ |
’-30 ~ +80℃ |
’-30 ~ +80℃ |
’-30 ~ +80℃ |
1. Resistive touch panel/capacitive touchscreen/demo board are available | ||||
2. Air bonding & optical bonding are acceptable |
DS070INX50N-032
Item |
Symbol |
Values |
Unit |
Remark |
||
|
|
Min |
Typ |
Max |
|
|
Power voltage |
DVDD |
3 |
3.3 |
3.6 |
V |
Note 2 |
|
AVDD |
10.2 |
10.4 |
10.6 |
V |
|
|
VGH |
15.3 |
16 |
16.7 |
V |
|
|
VGL |
-7.7 |
-7 |
-6.3 |
V |
|
Input signal voltage |
VCOM |
3.6 |
3.8 |
4 |
V |
|
Input logic high voltage |
VIH |
0.7 DVDD |
|
DVDD |
V |
Note 3 |
Input logic low voltage |
VIL |
0 |
|
0.3DVDD |
V |
Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH.
Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of customer’s system board.
Note 3: DCLK, HS, VS, RESET, U/D, L/R, DE, R0~R7,G0~G7,B0~B7, MODE, DITHB.
DS070INX50N-033
Item |
Symbol |
Values |
Unit |
Remark |
||
|
|
Min |
Typ |
Max |
|
|
Power voltage |
DVDD |
3 |
3.3 |
3.6 |
V |
Note 2 |
|
AVDD |
10.2 |
10.4 |
10.6 |
V |
|
|
VGH |
15.3 |
16 |
16.7 |
V |
|
|
VGL |
-7.7 |
-7 |
-6.3 |
V |
|
Input signal voltage |
VCOM |
3.6 |
3.8 |
4 |
V |
|
Input logic high voltage |
VIH |
0.7 DVDD |
|
DVDD |
V |
Note 3 |
Input logic low voltage |
VIL |
0 |
|
0.3DVDD |
V |
Note 1: Be sure to apply DVDD and VGL to the LCD first, and then apply VGH .
Note 2: DVDD setting should match the signals output voltage (refer to Note 3) of customer’s system board.
Note 3: DCLK, HS, VS, RESET, U/D, L/R, DE, R0~R7, G0~G7, B0~B7, MODE, DITHB.
DS070INX50N-039
Item |
Symbol |
Values |
Unit |
||
|
|
Min. |
Typ. |
Max. |
|
Power Voltage |
DVDD |
3.0 |
3.3 |
3.6 |
V |
|
AVDD |
10.2 |
10.4 |
10.6 |
V |
|
VGH |
- |
16.0 |
- |
V |
|
VGL |
- |
-7.0 |
- |
V |
Input Signal Voltage |
VCOM |
- |
4.1 |
- |
V |
DS070INX50T-036
Item | Symbol | Values | Unit | ||
Min. | Typ. | Max. | |||
Power Voltage |
DVDD | 3.0 | 3.3 | 3.6 | V |
AVDD | 10.2 | 10.4 | 10.6 | V | |
VGH | - | 16.0 | - | V | |
VGL | - | -7.0 | - | V | |
Input Signal Voltage | VCOM | - | 4.1 | - | V |
❤ Our specific datasheet can be provided! Just contact us by mail.❤
For 7inch we still have option with
7inch TFT LCD with CTP
7inch TFT with 630A
7inch TFT LCD with CTP
1. TFT LCD Display
* LCD panel Brightness up to 1,000 nits
* Technologies TN, IPS
* Resolutions from VGA to FHD
* Interfaces TTL RGB, MIPI, LVDS, eDP
* Operating temperature ranges up to -30° C~ + 85 ° C
2. Custom Size Touch Screen
* Customized design up to 32”
* G+G, P+G, G+F+F structure
* Multi-touch 1-10 touch points
* I2C, USB, RS232 UART implemented
* AG, AR, AF Surface treatment technology
* Support glove or passive pen
*Custom Interface, FPC, Lens, Color, Logo
3. LCD Controller Board
* With HDMI, VGA interface
* Support audio and speaker
* Keypad adjustment of brightness/color/contrast
As a TFT LCD manufacturer, we import mother glass from brands including BOE, INNOLUX, and HANSTAR, Century etc., then cut into small size in house, to assemble with in house produced LCD backlight by semi-automatic and fully-automatic equipment. Those processes contain COF(chip-on-glass), FOG(Flex on Glass) assembling, Backlight design and production, FPC design and production. So our experienced engineers have ability to custom the characters of the TFT LCD screen according to customer demands, LCD panel shape also can custom if you can pay glass mask fee, we can custom high brightness TFT LCD, Flex cable, Interface, with touch and control board are all available.