21.5 inch 1080×1920 Standard Color TFT LCD Display
DS215BOE30N-001 is a 21.5 inch TFT TRANSMISSIVE LCD Display,it applies to 21.5” color TFT-LCD panel. The 21.5 inch color TFT-LCD panel is designed for smart home, outdoor display, industrial equipment device and other electronic products which require high quality flat panel displays, excellent visual effect. This module follows RoHS.
1. Brightness can be customized, brightness can be up to 1000nits.
2. Interface can be customized, Interfaces TTL RGB, MIPI, LVDS, eDP is available.
3. Display’s view angle can be customized, full angle and partial view angle is available.
4. Our LCD display can be with custom resistive touch and capacitive touch panel.
5. Our LCD display can support with controller board with HDMI, VGA interface.
6. Square and round LCD display can be customized or any other special shaped display is available to custom.
Item | Standard Values |
Size | 21.5 inch |
Resolution | 1080X1920 |
Outline Dimension | 292.2 (H) x 495.6 (V) x8.0 (D) |
Display area | 260.28 (H) x478.656(V) |
Display mode | Normally white |
Pixel Configuration | RGB stripe |
LCM Luminance | 600cd/m2 |
Contrast Ratio | 1000:1 |
Optimum View Direction | Full view |
Interface | LVDS |
LED Numbers | 136 LEDs |
Operating Temperature | ’-20 ~ +60℃ |
Storage Temperature | ’-50 ~ +60℃ |
1. Resistive touch panel/capacitive touchscreen/demo board are available | |
2. Air bonding & optical bonding are acceptable |
Parameter |
Min. |
Typ. |
Max. |
Unit |
Remarks |
|
Power Supply Voltage |
VDD |
4.5 |
5 |
5.5 |
V |
Note 1 |
Permissible Input Ripple Voltage |
VRF |
- |
- |
100 |
mV |
At VDD = 3.3V |
Power Supply Current |
IDD |
- |
500 |
- |
mA |
Note 1 |
High Level Differential Input Threshold Voltage |
VIH |
- |
- |
100 |
mV |
|
Low Level Differential Input Threshold Voltage |
VIL |
-100 |
- |
- |
mV |
|
Differential input voltage |
I VID I |
0.2 |
0.4 |
0.6 |
V |
|
Differential input common mode voltage |
Vcm |
0.6 |
1.2 |
2.2 |
V |
|
Power Consumption
|
PD |
- |
2.5 |
- |
W |
Note 1 |
- |
- |
- |
- |
W |
||
Ptotal |
- |
- |
- |
W |
❤ Our specific datasheet can be provided! Just contact us by mail.❤
Whenever you want to choose the best Thin-film-translator LCD module for your applications, their things you should put into consideration. DISEN can do highly customization for you:
1. Size
The size is the first to consider for most of the design or applications to be used. Two choices of size are looked into which are the outline dimension and the active area.
2. Brightness
The brightness of the custom LCD module is an important factor that needs to be critically looked into for the choice of application and working environment to adopt. In this, we have the displaying angle and the contrasting properties which are influenced by the environment where it is located and also the mode of its use.
3. Viewing Angle
The custom LCD controls the viewing angle but this always comes with options to switch. For example, a contrast improvement technique with IPS technology offers a 180-degree viewing space.
4. Contrast Ratio
This is a factor that counts and determines the optical output of the device. Most of the custom LCD failure is exposed in high ambient light conditions.
5. Interface
TFT LCD modules come in different forms with different interfaces such as LVDS, RS232, HDMI, etc. The choice of the one to be used depends on the resources you installed on your devices as they have different systems and time requirements.
6. Temperature
There is a bit of science in the explanations of the temperature range to guarantee a long period of service and performance. There are several mechanisms put in place to improve the performance of the custom LCD.
7. Surface Coating, Touch Screen, Cover Len, and Optical Bonding
In the market of today, a lot of products are being pumped out daily and the majority of these products are utilized outdoors. Hence, displaced improvement has become a vital factor. Now that we have tablets and smartphones, there is a compulsory requirement for touch properties and an intelligent friendly user interface.
As a TFT LCD manufacturer, we import mother glass from brands including BOE, INNOLUX, and HANSTAR, Century etc., then cut into small size in house, to assemble with in house produced LCD backlight by semi-automatic and fully-automatic equipment. Those processes contain COF(chip-on-glass), FOG(Flex on Glass) assembling, Backlight design and production, FPC design and production. So our experienced engineers have ability to custom the characters of the TFT LCD screen according to customer demands, LCD panel shape also can custom if you can pay glass mask fee, we can custom high brightness TFT LCD, Flex cable, Interface, with touch and control board are all available.