2.1 inch customized LCD round screen for smart home Color TFT LCD Display
DS021BOE40N-001 is a 2.1inch normally black display mode,it applies to 2.1” color TFT-LCD panel.The 2.1inch color TFT-LCD panel is designed for electronic label,medical device,white house,smart home,industrial equipment device and other electronic products which require high quality flat panel displays,excellent visual effect.This module follows RoHS.
1.Brightness can be customized,brightness can be up to 1000nits.
2.Interface can be customized,Interfaces TTL RGB,MIPI, LVDS,SPI,eDP is available.
3.Display’s view angle can be customized,full angle and partial view angle is available.
4.Touch Panel can be customized,our LCD display can be with custom resistive touch and capacitive touch panel.
5.PCB Board solution can customized,our LCD display can support with controller board with HDMI,VGA interface.
6.Special share LCD can be customized,such as bar,square and round LCD display can be customized or any other special shaped display is available to custom.
| Item | Standard Values |
| Size | 2.1inch |
| Resolution | 480x480 |
| Outline Dimension | 56.18(W) x59.71(H)x2.3(D)mm |
| Display area | 53.28(W)×53.28(H)mm |
| Display mode | Normally black |
| Pixel Configuration | RGB Vertical stripes |
| LCM Luminance | 300cd/m2 |
| Contrast Ratio | 900:1 |
| Optimum View Direction | All |
| Interface | 0 5 PITCH 40PIN |
| LED Numbers | 4LEDs |
| Operating Temperature | ’-20 ~ +70℃ |
| Storage Temperature | ’-30 ~ +80℃ |
| Note 1: Viewing direction for best image quality is different from TFT definition. There is a 180 degree shift. | |
|
Item |
Symbol |
MIN |
MAX |
Unit |
Remark |
|
Power supply voltage for logic |
VDD |
0.3 |
4.8 |
V |
|
|
Input voltage |
Vin |
/ |
VDD+0.3 |
V |
|
|
Operating Temperature |
TOPR |
-20 |
70 |
℃ |
|
|
Storage Temperature |
TSTG |
-30 |
80 |
℃ |
|
Note: Note1: Absolute maximum rating is the limit value beyond which the IC maybe
broken.
They do not assure operations.
Note2: Background color changes slightly depending on ambient temperature. This
Phenomenon is reversible.
Ta≦70C: 75%RH max
Ta>70C: absolute humidity must be lower than the humidity of 75%RH at 70C Note3: Ta at -30C will be <48hrs, at 80 C will be < 120hrs
1-Operating conditions:
|
Parameter |
Symbol |
MIN |
TYP |
MAX |
Unit |
Remark |
|
Operating Voltage |
Vcc |
2.5 |
2.8 |
4.8 |
V |
|
|
Supply Current |
Idd |
-- |
-- |
50 |
mA |
VDD=2.8V,Ta=25oC |
|
Input Voltage |
VIH |
0.8VDD |
- |
VDD |
V |
|
|
Input Voltage |
|
0 |
-- |
0.2VDD |
V |
|
|
Input leakage current |
IIL |
-1 |
- |
1 |
A |
VIN=VDD or VSS |
Note: Voltage greater than above may damage the module.
All voltages are specified relative to VSS=0V.
2-Driving Backlight:
|
Item |
Symbol |
MIN |
TYP |
MAX |
Unit |
Remark |
|
Forward Current |
IF |
- |
80 |
88 |
A |
|
|
|
||||||
|
Forward Voltage |
VF |
|
3.2 |
- |
V |
|
|
Connection mode |
|
- |
4Parallel |
- |
V |
|
|
LED number |
/ |
- |
4 |
- |
Pcs |
|
Note1: Optical performance should be evaluated at Ta=25C only .If LED is driven by high current, high ambient temperature & humidity condition. The life time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
❤ Our specific datasheet can be provided! Just contact us by mail.❤
A1: We are 10 years of experience manufacturing TFT LCD and touch screen.
►0.96" to 32" TFT LCD Module;
►High brightness LCD panel custom;
►Bar type LCD screen up to 48 inch;
►Capacitive touch screen up to 65";
►4 wire 5 wire resistive touch screen;
►One-step solution TFT LCD assemble with touch screen.
A2: Yes we can provide the customize services for all kinds of LCD screen and touch panel.
►For the LCD display,backlight brightness and FPC cable can be customized;
►For the touch screen,we can custom the whole touch panel like the color,shape,cover thickness and so on according to the customer's requirement.
►NRE cost will be refunded after the total quantity reaches 5K pcs.
►Industrial system,medical system,Smart home,intercom system,embedded system,automotive and etc.
►For samples order,it is about 1-2weeks;
►For mass orders,it is about 4-6weeks.
►For first time cooperation,samples will be charged,the amount will be returned at the mass order stage.
►In regular cooperation,samples are free.Sellers keep the right for any change.
As a TFT LCD manufacturer, we import mother glass from brands including BOE, INNOLUX, and HANSTAR, Century etc., then cut into small size in house, to assemble with in house produced LCD backlight by semi-automatic and fully-automatic equipment. Those processes contain COF(chip-on-glass), FOG(Flex on Glass) assembling, Backlight design and production, FPC design and production. So our experienced engineers have ability to custom the characters of the TFT LCD screen according to customer demands, LCD panel shape also can custom if you can pay glass mask fee, we can custom high brightness TFT LCD, Flex cable, Interface, with touch and control board are all available. 
